Copper water tubes are susceptible to: cold water pitting caused by contamination of the pipe interior, typically with soldering flux; erosion corrosion caused by high speed or turbulent flow; and stray current corrosion, caused by poor electrical wiring technique, such as improper grounding and bonding.
2、Pin holes
Pin-hole leaks with pitting initiating on the exterior surface of the pipe, can occur if copper piping is improperly grounded or bonded. The phenomenon is known technically as stray current corrosion or electrolytic pitting. Pin-holing due to poor grounding or poor bonding occurs typically in homes where the original plumbing has been modified; homeowners may find that a new plastic water filtration device or plastic repair union has interrupted the water pipe's electrical continuity to ground, when they start seeing pinhole water leaks after a recent install. Damage occurs rapidly, usually becoming obvious about six months after the ground interruption. Correctly installed plumbing appliances will have a copper bonding jumper cable connecting the interrupted pipe sections. Pinhole leaks from stray current corrosion can result in thousands of dollars in plumbing bills, and sometimes require the replacement of the entire affected water line. The cause is fundamentally an electrical defect, not a plumbing defect; once the plumbing damage is repaired, an electrician should promptly be consulted to evaluate the grounding and bonding of the entire plumbing and electrical systems.
Guangdong Shunde Seko Machinery & Technology Co.,Ltd.www.gdseko.com
Lucy Xie
sevvice@gdseko.com
Skype:Lucy
Xie,SEKO Machinery
Skype:Lucy
Xie,SEKO Machinery
Suggested Reading: What are the types of copper tubing?（2）
没有评论:
发表评论